Silver Conductive Paste LY-910

Description
LY-910 is a low temperature conductive silver paste for screen printing, specially designed for the keyboard circuit, membrane switches, printing resistance& electric heating element, etc.

Substrates
It can be printed on substrate of PC, PET, PVC, PU film, EL panel and ITO film.

Benefits
Low heat-drying temperature , short-drying time
Low resistivity, Good adhesion
Superior abrasion resistance and flexibility

Typical Application
Membrane Switches, Flexible Circuits, ITO Film, Printed Antennas
RFI Shielding, EL backlight, Heating Element, Piezoelectric ceramics

Screen Types
Stainless steel, Polyester

Typical Cure Conditions
130℃ for 30 minutes; 150℃ for 10 minutes

Typical Properties
Test                                                                                                        Properties
Viscosity (Pa.S) (Brookfield DV1, SC4-14,10rpm,25±0.5℃)         5-40
Solid Content (%)                                                                                60±2
Screen Mesh (Stainless steel screen)                                            165~325
Screen Mesh(Polyester screen)                                                      160~300
Recommended Drying T/t                                                             130℃/30min, or 150℃/10min
Coverage(cm2/g)(dependent on film thickness)                     100-200
Sheet Resistance(Ω/sq)(film thickness: 6µm)                           ＜0.07
Adhesion/ Tape Pull(3M Scotch Tape #600)                             No Ag Transfer
Abrasion Resistance,Pencil Hardness(H)                                   ≥2
Solderability                                                                                       Not Recommended
Operating Use Temperature(℃)                                                  ＜70

Shelf Life
Six Months from Date of Shipment

Delivery and Storage
During transportation and storage should protect against the dampness and contamination. Containers may be stored in a clean, dry and stable environment at room temperature (between 0℃～5℃), with their lids tightly sealed. The shelf life of the paste is 6 months. The used material should be collected and sealed up alone. Don’t mix with other untapped material.